Paradyne 4200 - Manual (Page 81)

3. ADSL Facility Commands
4200-A2-GB20-00 August 2002 3-45
Table 3-36. RTRV-PROFILE-ADSLDN Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
adsl_profile_id As described for command parameters (see Table 3-35,
RTRV-PROFILE-ADSLDN Command Parameters ), except that ALL is
not used.
profile_scope As described for command parameters (see Table 3-35,
RTRV-PROFILE-ADSLDN Command Parameters ).
profile_name A string of up to 32 characters that uniquely identifies the profile within
its scope.
[adslprof_nblk] ADSL parameter block containing one or more of the following named
parameters (separated by commas):
PFBR: Planned fast channel bit rate in kilobits per second (32
−
2176).
MAXFBR: Maximum fast-channel bit rate in kilobits per second
(32
−
2176).
MINFBR: Minimum fast-channel bit rate in kilobits per second (32).
MAXNMR: Maximum additional noise margin (16 dB).
MINNMR: Minimum additional noise margin (0 dB).
RAMODE: Rate adaptive mode. The valid values is AT_RUN
(automatically selected at run time).
TNMR: Target noise margin (3
−
14 dB).
If not specified, the values of these parameters remain unchanged.
errcde Error code (see Appendix A, Error Codes )