Paradyne 4200 - Manual (Page 196)

10. Fault Commands
10-4 August 2002 4200-A2-GB20-00
Example
Retrieve all major service-affecting ADSL alarms for rack 1, shelf 1, slot 1, circuit 4.
RTRV-ALM-ADSL:TAMPA:ADSL-1-1-1-4:42::MJ,,SA;
TAMPA 02-06-27 03:38:43
M 42 COMPLD
/* RTRV-ALM-ADSL:TAMPA:ADSL-1-1-1-4:42:::: */
"ADSL-1-1-1-4,ADSL:MJ,LPR,SA,,,NEND,RCV,:Loss of Power"
;
Related Commands
None
cond ADSL Condition. Valid values are:
FACTERM: Modem could not initialize (near-end only)
LCD-F: Loss of Cell Delineation (fast) (near-end only)
LOF: Loss of Frame
LOL: Loss of Link (near-end only)
LOS: Loss of Signal (near-end only)
LPR: Loss of Power (far-end only)
LORATE: Line rate is below planned rate (Loss of Signal Quality)
serveff As described for command parameters (see Table 10-1,
RTRV-ALM-ADSL Command Parameters ), except that ALL is not used.
locn As described for command parameters (see Table 10-1,
RTRV-ALM-ADSL Command Parameters ).
dirn As described for command parameters (see Table 10-1,
RTRV-ALM-ADSL Command Parameters ).
cond_descr Description of alarm condition
Table 10-2. RTRV-ALM-ADSL Response Parameters (2 of 2)
Parameter Explanation