Paradyne 4200 - Manual (Page 320)

B. Command Cross Reference
B-6 August 2002 4200-A2-GB20-00
RD Commands
Read (RD) commands retrieve data from the NE.
REPT Commands
Report (REPT) commands report current operational parameters.
Table B-12. RD Commands
Command See . . .
RD-SYNCN RD-SYNCN on page 13-4 in Chapter 13, Synchronization
Commands
Table B-13. REPT Commands
Command See . . .
REPT-ALM-ADSL REPT ALM ADSL on page 3-28 in Chapter 3, ADSL
Facility Commands
REPT-ALM-EQPT REPT ALM EQPT on page 7-4 in Chapter 7, Equipment
Commands
REPT-ALM-T1 REPT ALM T1 on page 4-8 in Chapter 4, DS1 Facility
Commands
REPT-EVT-ADSL REPT EVT ADSL on page 3-30 in Chapter 3, ADSL Facility
Commands
REPT-EVT-EQPT REPT EVT EQPT on page 7-5 in Chapter 7, Equipment
Commands
REPT-EVT-T1 REPT EVT T1 on page 4-9 in Chapter 4, DS1 Facility
Commands
REPT-OPSTAT-ADSLCOM REPT-OPSTAT-ADSLCOM on page 9-2 in Chapter 9,
Performance Commands
REPT-OPSTAT-ADSLDN REPT-OPSTAT-ADSLDN on page 9-5 in Chapter 9,
Performance Commands
REPT-OPSTAT-ADSLUP REPT-OPSTAT-ADSLUP on page 9-7 in Chapter 9,
Performance Commands
REPT-OPSTAT-IPPORT REPT-OPSTAT-IPPORT on page 8-14 in Chapter 8, IP
Access Commands
REPT-OPSTAT-T1 REPT-OPSTAT-T1 on page 4-10 in Chapter 4, DS1 Facility
Commands
REPT-OPSTAT-VCL REPT-OPSTAT-VCL on page 9-10 in Chapter 9,
Performance Commands