Example, Related commands – Paradyne 4200 User Manual
Page 77
3. ADSL Facility Commands
4200-A2-GB20-00
August 2002
3-41
Example
Retrieve profile 5.
RTRV-PROFILE-ADSL:TAMPA:5:42;
TAMPA 02-07-24 12:30:43
M 42 COMPLD
/* RTRV-PROFILE-ADSL:TAMPA:5:42 */
5:LOCAL:TAMPA101:CONFIG
;
Related Commands
Table 3-32. RTRV-PROFILE-ADSL Response Parameters
Parameter Explanation
tid Target
NE
identification
yy-mm-dd
Year, month, and day
hh:mm:ss
Hour, minute, and second
M
Message generated in response to an input command
c
If provided, ctag; otherwise 0
COMPLD Completed
DENY
Input command is denied
/* */
Enclosed are human readable comments – unspecified format
adsl_profile_id
As described for command parameters, except that ALL is not used
profile_name
Name (32 characters maximum) that uniquely identifies the profile
within its scope
profile_scope
As described for command parameters
latency
Latency of the ADSL line. Only single latency is supported upstream
and downstream. The valid value is FAST (only ADSL FAST supported).
profile_state
State of the profile (ADSL profiles only). Values are:
CONFIG: Profile is currently being created. It can be configured, but not
used.
ACTIVE: Profile has been activated and is ready for use and is
configured.
errcde
Error code (see