Paradyne 4200 - Manual (Page 252)

12. Security Commands
12-14 August 2002 4200-A2-GB20-00
RTRV-USER-SECU
The RTRV-USER-SECU command retrieves the security levels for a specified
user. The user’s password cannot be retrieved.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */
"uid:uap:uid_nblk"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */
aid:ERRCDE=errcde
/* error description */
;
Table 12-13. RTRV-USER-SECU Command Parameters
RTRV-USER-SECU:[tid]:uid:[ctag][:];
RESTRICTIONS: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
uid User Identification name (10 characters maximum). Input is
case-sensitive. ALL is supported.
[ctag] Correlation tag (6 characters) maximum that links an input command
with associated output responses. The default is 0.