3 alarms and events – GE Industrial Solutions Entellisys 5.0 User Manual User Manual
Page 123
Advertising
Multi-Source Ground-Fault Relay
123
7
7.2.1.3 Alarms and Events
Multi-Source GF Alarm and Trip functions have a configurable alarm for each zone. To configure
a MSFG Alarm on the HMI:
1. On the Main Menu, click User Settings, and then select Alarms.
2. On the Alarms screen, click Alarms Setup as shown in Figure 7-7.
3. Select the Multi-Source Ground Fault Alarm or Trip Alarm and enter a comment in the
Comment text box.
Figure 7-7 Setting up Multi-Source GF alarms
Events
To view a table of the events generated by the Bus Differential Relay, see
.
Advertising