GE Industrial Solutions Entellisys 5.0 User Manual - Manual (Page 194)

Discrete I/O 190
10
Entellisys Publisher Configuration
The publisher fields define the exported Entellisys CID file. To setup 3rd party 61850 GOOSE
compliant devices as publishers to Entellisys, the exported Entellisys CID file must be imported
into the device configuration software.
VLAN ID: (Default 1). Used by VLAN enabled switches and routers to limit the ethernet ports to
which Goose traffic may propagate. Valid range is 0-FFF in Hex.
Valid VLAN Priority: 0-7
Additional Publisher Information
Additionally, the subscriber may need the following:
• IEDName = “GE_ELVS”
• Access PT Name = “S1”
• GSEControl name = “RemoteIO”
AppID No: Refers to
the “APPID” field in the
subnetwork section of
the CID.
GOID: Describes the
appID field defined in
the S1 Access Point
Name
DEST MAC Address: In the 61850 standard, the Destination mac address is used to both
define the type ethernet packet, (GOOSE multicast) and the device which sent the original
packet. The first 4 octets (01-0C-CD-01) define the type of ethernet packet and the last 2 are
reserved for the identification of the Publisher. Valid values are 00-00 to 01-FF.