2 usage – GE Industrial Solutions Entellisys 5.0 User Manual User Manual
Page 128
Advertising
Multi-point functions
128
7
7.3.2 Usage
To view the PT source in use by a given circuit breaker
1. On the User Settings screen, click Metering & Waveforms.
2. On the Metering & Waveforms screen, click Metering.
In Figure 7-9, the metering information is shown for circuit breaker FL1. It does not have a PT
attached and it uses circuit breaker M1 for voltage information.
Figure 7-9 Metering information for circuit breaker FL1
Advertising