GE Industrial Solutions Entellisys 5.0 User Manual User Manual
Page 272
Alarms and events
260
A
Waveforms Cleared By
Command
CPU received (via Modbus) and executed a
command to clear its waveform capture buffers
Waveform Capture Triggered By
Command
CPU received (via Modbus) and executed a
command to trigger a waveform capture
Fault Report Triggered By
Command
CPU received (via Modbus) and executed a
command to trigger a fault report
Date Time Updated
CPU date and time changed
Demand Log Cleared All By
Command
CPU received (via Modbus) and executed a
command to reset the demand log for a single
breaker
Demand Log Cleared By
Command
CPU received (via Modbus) and executed a
command to reset the demand logs for all breakers
Demand Reset By Command
CPU received (via Modbus) and executed a
command to reset the demand values for a single
breaker
Demand Reset All By Command CPU received (via Modbus) and executed a
command to reset the demand values for all
breakers
Table A-3 Commands from HMI
Event
Description
Notes and Troubleshooting tips