A.2.10 preventative maintenance events, A-11 – GE Industrial Solutions Entellisys 5.0 User Manual User Manual
Page 301
Alarms and events description and system troubleshooting guide
289
A
A.2.10 Preventative Maintenance Events
Attention Messngr Error 4
Replace ASAP
Messenger reports that it is not calibrated and
should be replaced
Contact GE Post Sales Service (see
Table A-10 Messenger/Breaker Config Status Events
Event
Description
Notes and Troubleshooting tips
Table A-11 Preventative Maintenance Events
Event
Description
Notes and Troubleshooting tips
Breaker In Service Anniversary
Breaker anniversary date has been reached
Breaker Mechanical Life At XX
Percent
See section on Preventative Maintenance
Breaker Load Life At XX Percent See section on Preventative Maintenance
Demand Reset All By Command CPU received (via Modbus) and executed a
command to reset the demand values for all
breakers