GE Industrial Solutions Entellisys 5.0 User Manual - Manual (Page 199)

Introduction to FlexLogic 189
11
ELEMENT:
High Resistance
Ground Fault Location HRGF LOCATION FUNCTION 1 OFF
HRGF LOCATION FUNCTION 1 ON HRGF Location Function 1 On pulses for the
contactor output - positive logic
HRGF Location Function 1 Off pulses for the
contactor output - negative logic
HRGF LOCATION 2…4 Same set of operands as shown for HRGF
Location 1
ELEMENT:
Instantaneous
Overcurrent IOC 1 OP
IOC 1 DPO Instantaneous Overcurrent 1 activated
Instantaneous Overcurrent 1 deactivated
IOC 2…30 Same set of operands as shown for IOC 1
ELEMENT:
Long Time
Overcurrent LONG TIME 1 PKP
LONG TIME 1 OP
LONG TIME 1 DPO Long Time Overcurrent 1 in pickup
Long Time Overcurrent 1 tripped breaker
Long Time Overcurrent 1 not in pickup
LONG TIME 2…30 Same set of operands as shown for LONG
TIME 1
ELEMENT:
Multi-Source Ground
Fault MSGF ZONE 1 TRIP DPO
MSGF ZONE 1 ALARM DPO
MSGF ZONE 1 TRIP PKP
MSGF ZONE 1 ALARM PKP
MSGF ZONE 1 TRIP OP
MSGF ZONE 1 ALARM OP
MSGF ZONE 1 TRIP BACKUP OP
Multi-Source GF Zone 1 trip function not in
pickup
Multi-Source GF Zone 1 alarm function not
in pickup
Multi-Source GF Zone 1 trip function in
pickup
Multi-Source GF Zone 1alarm function in
pickup
Multi-Source GF Zone 1 trip function has
tripped breakers
Multi-Source GF Zone 1 alarm activated
Multi-Source GF Zone 1 trip backup function
has tripped backup breakers
MSGF ZONE 2…4 Same set of operands as shown for MSGF
ZONE 1
Table 11-2 Entellisys FlexLogic operands
OPERAND TYPE OPERAND SYNTAX OPERAND DESCRIPTION