Teledyne GFC-7000T - Trace CO2 Analyzer - manual User Manual
Page 101
Operating Instructions
Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments
83
To define the REPORT PERIOD, follow the instruction shown in Section 6.7.2.2 then press:
Edit Data Channel Menu
SETUP X.X
0) CONC: ATIMER, 1, 900
PREV NEXT INS DEL
EDIT
PRNT
EXIT
SETUP X.X
NAME:CONC
<SET
SET>
EDIT
EXIT
Press SET> key until you reach REPORT PERIOD …
SETUP X.X
REPORT PERIODD:DAYS:0
0 0 0
ENTR EXIT
IIf at any time an illegal entry is selected (e.g., days > 366)
the ENTR button will disappear from the display.
SETUP X.X
REPORT PERIODD:TIME:01:01
0 1 0 0
ENTR EXIT
SETUP X.X
REPORT PERIOD:000:01:00
<SET SET>
EDIT
EXIT
Exits to the main
Data Acquisition
menu.
ENTR
accepts the new string and
returns to the previous menu.
EXIT
ignores the new string and
returns to the previous menu.
Press buttons to set hours
between reports in the format :
HH:MM (max: 23:59). This is a
24 hour clock . PM hours are 13
thru 23, midnight is 00:00.
Example 2:15 PM = 14:15
Set the number of days
between reports (0-366).
Use the PREV and NEXT
buttons to scroll to the
data channel to be edited.
From the DATA ACQUISITION menu
(see Section 6.7.2.2)