Teledyne GFC-7000T - Trace CO2 Analyzer - manual - Manual (Page 5)

Safety Messages Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments v
SAFETY MESSAGES
Important safety messages are provided throughout this manual for the purpose of avoiding personal
injury or instrument damage. Please read these messages carefully. Each safety message is associated
with a safety alert symbol, and are placed throughout this manual; the safety symbols are also located
inside the instrument.
It is imperative that you pay close attention to these messages, the
descriptions of which are as follows:
WARNING : Electrical Shock Hazard
HAZARD : Strong oxidizer
GENERAL WARNING/CAUTION : Read the accompanying message for
specific information.
CAUTION : Hot Surface Warning
Do Not Touch : Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or the
instrument.
Technician Symbol : All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground : This symbol inside the instrument marks the central
safety grounding point for the instrument.
CAUTION
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other than
that for which it was intended, unpredictable behavior could ensue with
possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es)!
Note: Technical Assistance regarding the use and maintenance of the GFC7001TA or
any other Teledyne product can be obtained by contacting Teledyne Customer
Service Department:
Phone: 888-789-8168
Email: [email protected]
or by accessing various service options on our website at
http://www.teledyne-ai.com/