Teledyne GFC-7000T - Trace CO2 Analyzer - manual - Manual (Page 28)

Getting Started Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments 10
4. Inspect the interior of the instrument to make sure all circuit boards and other components are in
good shape and properly seated.
5. Check the connectors of the various internal wiring harnesses and pneumatic hoses to make sure
they are firmly and properly seated.
6. Verify that all of the optional hardware ordered with the unit has been installed. These are listed
on the paperwork accompanying the analyzer.
VENTILATION CLEARANCE : Whether the analyzer is set up on a bench or installed into an instrument
rack, be sure to leave sufficient ventilation clearance.
AREA MINIMUM REQUIRED CLEARANCE
Back of the instrument
4 in.
Sides of the instrument
1 in.
Above and below the instrument 1 in.
Various rack mount kits are available for this analyzer. See Section 5.1 of this manual for more
information.