Figure 10-1: viewing and clearing warning messages – Teledyne GFC-7000T - Trace CO2 Analyzer - manual User Manual
Page 237
Troubleshooting
Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments
219
To view or clear the various warning messages press:
SAMPLE
WHEEL TEMP WARNING CO2 = XX.XX
TEST
CAL
MSG
CLR
SETUP
Make sure warning messages
are not due to
legitimate problems..
Press CLR to clear the
message currently being
Displayed.
If more than one warning is
active the next message will
take its place
Once the last warning has been
cleared, the analyzer returns to
SAMPLE
Mode
SAMPLE
RANGE=500.00 PPM
CO2 = XX.XX
< TST TST > CAL
MSG
CLR
SETUP
SAMPLE
WHEEL TEMP WARNING
CO2 = XX.XX
< TST TST > CAL
MSG
CLR
SETUP
TEST
deactivates Warning
Messages until New warning(s)
are activated
MSG
activates Warning
Messages.
<TST TST
> keys replaced with
TEST
key
Figure 10-1:
Viewing and Clearing Warning Messages