Allied Telesis AT-S63 - Manual (Page 113)

AT-S63 Stack Command Line User’s Guide
Section I: Basic Features 113
DISABLE SNMP AUTHENTICATETRAP
Syntax
disable snmp authenticatetrap|authenticate_trap
Parameters
None.
Description
This command stops the stack from sending authentication failure traps to
trap receivers. However, the stack will continue to send other system
traps, such as alarm traps. The default setting for sending authentication
failure traps is disabled.
The AUTHENTICATETRAP and AUTHENTICATE_TRAP keywords are
equivalent.
To activate the authentication failure trap, refer to “ENABLE SNMP
AUTHENTICATETRAP” on page 116.
Example
The following command instructs the stack not to send authentication
failure traps to SNMP trap receivers:
disable snmp authenticatetrap