Enable rstp – Allied Telesis AT-S63 User Manual
Page 360
Advertising
Chapter 20: Rapid Spanning Tree Protocols Commands
360
Section V: Spanning Tree Protocols
ENABLE RSTP
Syntax
enable rstp
Parameters
None.
Description
This command enables the Rapid Spanning Tree Protocol on the stack.
The default setting for RSTP is disabled. To view the current status of
RSTP, use “SHOW RSTP” on page 368.
You cannot enable RSTP until you have activated it with the ACTIVATE
RSTP command.
Example
The following command enables RSTP:
enable rstp
Advertising