Allied Telesis AT-S63 - Manual (Page 175)

175
Chapter 11
LACP Port Trunking Commands
This chapter contains the following commands:
ˆ “ADD LACP PORT” on page 176
ˆ “CREATE LACP AGGREGATOR” on page 178
ˆ “DELETE LACP PORT” on page 180
ˆ “DESTROY LACP AGGREGATOR” on page 181
ˆ “DISABLE LACP” on page 182
ˆ “ENABLE LACP” on page 183
ˆ “SET LACP AGGREGATOR” on page 184
ˆ “SET LACP SYSPRIORITY” on page 186
ˆ “SET LACP STATE” on page 187
ˆ “SHOW LACP” on page 188
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For overview information on this feature, refer to the AT-S63
Management Software Features Guide.