Allied Telesis AT-S63 - Manual (Page 421)

421
Chapter 23
802.1x Port-based Network Access
Control Commands
This chapter contains the following commands:
ˆ “DISABLE PORTACCESS|PORTAUTH” on page 422
ˆ “DISABLE RADIUSACCOUNTING” on page 423
ˆ “ENABLE PORTACCESS|PORTAUTH” on page 424
ˆ “ENABLE RADIUSACCOUNTING” on page 425
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR”
on page 426
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT” on
page 435
ˆ “SET RADIUSACCOUNTING” on page 437
ˆ “SHOW PORTACCESS|PORTAUTH” on page 439
ˆ “SHOW PORTACCESS|PORTAUTH PORT” on page 441
ˆ “SHOW RADIUSACCOUNTING” on page 444
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For overview information on this feature, refer to the AT-S63
Management Software Features Guide.