Allied Telesis AT-S63 - Manual (Page 47)

AT-S63 Stack Command Line User’s Guide
Section I: Basic Operations 47
In the final stage the master switch configures the devices with the
commands in the active configuration file in its file system. If this is the first
time the stack is booted up, you will see the messages in Figure 6.
Figure 6. Console Messages at the Completion of the Discovery Process
At this point, the stack is operational and ready to forward network traffic
on the ports. To log in and manage the stack, press Return to display the
login prompt.
An alternative method for monitoring the initialization process is by
observing the Stack MSTR LED on the front panel of the master switch.
The LED becomes steady green when the stack is ready for network
operations. (Do not confuse the Stack MSTR LED with the Status
MASTER LED. The latter is used with enhanced stacking, a feature not
supported on a stack.)
Configuring the Stack............................. done!
Reinitializing Software Modules .................. done!
Configuration file "stack.cfg" not found!
Loading default configuration ........ done!