Set telnet insertnull – Allied Telesis AT-S63 User Manual
Page 90
Chapter 5: Basic Stack Commands
90
Section I: Basic Operations
SET TELNET INSERTNULL
Syntax
set telnet insertnull=on|off
Parameters
insertnull
Controls whether the Telnet server inserts a NULL character
after each CR sent to the remote client. Options are:
on
Sends a NULL character after each CR sent to the
remote client.
off
Specifies that no NULL character is sent to the
remote client. This is the default setting.
Description
You can use this command to toggle the Telnet server on the master
switch to add a NULL character after each CR for those Telnet clients that
require the character in order to display the information correctly. The
default setting on the master switch is to not send the NULL character
after a CR. To view the current setting, see “SHOW SWITCH” on page 97.
Example
This command configures the master switch to send a NULL character
after each CR during a Telnet management session:
set telnet insertnull=on