Allied Telesis AT-S63 - Manual (Page 333)

AT-S63 Stack Command Line User’s Guide
Section IV: SNMPv3 333
SHOW SNMPV3 COMMUNITY
Syntax
show snmpv3 community index= index
Parameter
index Specifies the name of this SNMPv3 Community
Table entry, up to 32 alphanumeric characters.
Description
This command displays the SNMPv3 Community Table. You can display
one or all of the SNMPv3 Community Table entries.
Examples
The following command displays the Community Table entry with an index
of 246:
show snmpv3 community index=246
The following command displays all of the Community Table entries:
show snmpv3 community