Enable telnet – Allied Telesis AT-S63 User Manual
Page 77
Advertising
AT-S63 Stack Command Line User’s Guide
Section I: Basic Operations
77
ENABLE TELNET
Syntax
enable telnet
Parameters
None.
Description
This command activates the Telnet server on the master switch. When the
server is activated, you can remotely manage the stack using the Telnet
application protocol. To disable the server, refer to “DISABLE TELNET” on
page 76. The default setting for the Telnet server is enabled.
Example
The following command activates the Telnet server:
enable telnet
Advertising