Set password operator – Allied Telesis AT-S63 User Manual
Page 87
Advertising
AT-S63 Stack Command Line User’s Guide
Section I: Basic Operations
87
SET PASSWORD OPERATOR
Syntax
set password operator
Parameters
None.
Description
This command sets the operator’s password. Logging in as operator
allows you to only view the parameter settings in a stack. The default
password is “operator.” The password can be from 0 to 16 alphanumeric
characters. Allied Telesis recommends that you avoid special characters,
such as spaces, asterisks, or exclamation points because some web
browsers do not accept them in passwords. The password is case
sensitive.
Example
The following command changes the operator’s password:
set password operator
Follow the prompts to enter the new password.
Equivalent Command
set user operator password=
password
Advertising