Delete snmpv3 user – Allied Telesis AT-S63 User Manual
Page 302
Advertising
Chapter 18: SNMPv3 Commands
302
Section IV: SNMPv3
DELETE SNMPV3 USER
Syntax
delete snmpv3 user=
user
Parameters
user
Specifies the name of an SNMPv3 user to delete
from the stack.
Description
This command deletes an SNMPv3 User Table entry. After you delete an
SNMPv3 user from the stack, you cannot recover it.
Examples
The following command deletes the user named “wilson890.”
delete snmpv3 user=wilson890
The following command deletes the user named “75murthy75.”
delete snmpv3 user=75murthy75
Advertising