Allied Telesis AT-S63 User Manual
Page 438
Chapter 23: 802.1x Port-based Network Access Control Commands
438
Section VIII: Port Security
Description
RADIUS accounting is supported on those switch ports operating in the
Authenticator role. The accounting information sent by the switch to a
RADIUS server includes the date and time when clients log on and log off,
as well as the number of packets sent and received by a switch port during
a client session. This feature is disabled by default on the switch.
Examples
The following command activates RADIUS accounting and sets the trigger
to stop only:
set radiusaccounting status=enabled trigger=stop_only
The following command enables the update feature and sets the interval
period to 200 seconds:
set radiusaccounting updateenable=enabled interval=200