Allied Telesis AT-S63 - Manual (Page 334)

Chapter 18: SNMPv3 Commands
334 Section IV: SNMPv3
SHOW SNMPv3 GROUP
Syntax
show snmpv3 group username= username
[securitymodel=v1|v2c|v3]
Parameter
username Specifies a user name configured in the SNMPv3
User Table.
securitymodel Specifies the security model of the above user
name. The options are:
v1 Associates the Security Name, or User
Name, with the SNMPv1 protocol.
v2c Associates the Security Name, or User
Name, with the SNMPv2c protocol.
v3 Associates the Security Name, or User
Name, with the SNMPv3 protocol.
Description
This command displays SNMPv3 SecurityToGroup Table entries. You can
display one or all of the table entries.
Example
The following command displays the SNMPv3 SecurityToGroup Table
entry for a user named Dave who is assigned a security model of the
SNMPv3 protocol.
show snmpv3 group username=Dave securitymodel=v3
The following command displays all of the SNMPv3 SecurityToGroup
Table entries:
show snmpv3 group