At-stackxg stacking module – Allied Telesis AT-S63 User Manual
Page 29
Advertising
AT-S63 Stack Command Line User’s Guide
Section I: Basic Operations
29
AT-StackXG Stacking Module
The AT-9400 Switch must have the AT-StackXG Stacking Module, shown
in Figure 1, to be part of a stack. You install the module in the switch’s
expansion slot on the back panel. For installation instructions, refer to the
AT-9400 Stack Installation Guide.
Figure 1. AT-StackXG Stacking Module
1240
AT-LX44CPUCVR
AT-StackXG
Stack Por
t 1
Stac
k Por
t 2
Advertising