Allied Telesis AT-S63 - Manual (Page 80)

Chapter 5: Basic Stack Commands
80 Section I: Basic Operations
RESET SYSTEM
Syntax
reset system [name] [contact] [location]
Parameters
name Deletes the switch’s name.
contact Deletes the switch’s contact.
location Deletes the switch’s location.
Description
This command delete’s the stack’s name, the name of the network
administrator responsible for managing it, and its location. To set these
parameters, refer to “SET SYSTEM” on page 89. To view the current
settings, refer to “SHOW SYSTEM” on page 100.
Examples
This command deletes all three parameter settings:
reset system
This command deletes just the name:
reset system name