Show flash – Allied Telesis AT-S63 User Manual
Page 214
Advertising
Chapter 13: File System Commands
214
Section II: Advanced Operations
SHOW FLASH
Syntax
show flash
Parameter
None
Description
This command displays information about the file system in the master
switch. The information includes the number of files, how much space is
used, and the amount of space available. An example is shown in
Figure 26.
Figure 26. SHOW FLASH Command
Example
show flash
Flash:
---------------------------------------------------------
Files ..............
12288 bytes (5 files)
Free .............. 8211456 bytes
Total .............. 8223744 bytes
---------------------------------------------------------
Advertising