Set time – Allied Telesis AT-S63 User Manual
Page 91
Advertising
AT-S63 Stack Command Line User’s Guide
Section I: Basic Operations
91
SET TIME
Syntax
set time=
hh:mm:ss
Parameter
time
Specifies the hour, minute, and second for the stack’s
time in 24-hour format.
Description
This command manually sets the time on the stack. You can use this
command to set the stack’s time if you are not using an SNTP server. The
date and time are maintained even when the switch is powered off
because the unit has an onboard battery.
Example
The following command sets the stack’s time to 4:34 pm and 52 seconds:
set time=16:34:52
Advertising