Allied Telesis AT-S63 - Manual (Page 247)

AT-S63 Stack Command Line User’s Guide
Section II: Advanced Operations 247
PURGE LOG
Syntax
purge log[=permanent|temporary]
Parameter
log Specifies the event log to be purged. The options are:
permanent Permanent (nonvolatile) memory.
Deletes all of the events in the event
log in nonvolatile memory, which can
contain up to 2,000 events.
temporary Temporary memory. Deletes all of the
events in the event log in temporary
memory, which can contain up to
4,000 events. This is the default if you
do not specify the “permanent” option.
Description
This command deletes all the entries stored in an event log.
Example
The following command deletes all the entries in the event log stored in
temporary memory:
purge log=temporary
The following command deletes all the entries in both event logs:
purge log