Enable snmp – Allied Telesis AT-S63 User Manual
Page 115
Advertising
AT-S63 Stack Command Line User’s Guide
Section I: Basic Features
115
ENABLE SNMP
Syntax
enable snmp
Parameters
None.
Description
This command activates SNMP on the stack so that you can remotely
manage the unit with an SNMP application program from a management
station on your network. It also enables the stack to send SNMP traps to
trap receivers. The default setting for SNMP on the stack is disabled.
Example
The following command activates SNMP on the stack:
enable snmp
Advertising