Set switch infiltering – Allied Telesis AT-S63 User Manual
Page 383
AT-S63 Stack Command Line User’s Guide
Section VI: Virtual LANs
383
SET SWITCH INFILTERING
Syntax
set switch infiltering=yes|no|on|off|true|false
Parameters
infiltering
Specifies the operating status of ingress filtering.
The options are:
yes, on, true
Activates ingress filtering. The
options are equivalent. This is the
default setting.
no, off, false Deactivates ingress filtering. The
options are equivalent.
Description
This command controls the status of ingress filtering. When ingress
filtering is activated, which is the default setting, tagged frames are filtered
when they are received on a port. When ingress filtering is deactivated,
tagged frames are filtered before they are transmitted out a port. To view
the current setting, use the “SHOW SWITCH” on page 97.
Example
The following command deactivates ingress filtering:
set switch infiltering=off