Anritsu ML2430A - Manual (Page 122)

Related
Commands: DUTYS
Query: DUTY? <s>
Returned
String: DUTY <s>,<duty cycle>
DUTYS Duty cycle state SENSOR
Syntax: DUTYS <s>,<state>
s: A or B
state: ON or OFF
Remarks: Turns on or off the duty cycle for the selected sensor.
Related
Commands: DUTY
Query: DUTYS? <s>
Returned
String: DUTYS <s>,<state>
EMUL GPIB emulation mode GPIB SETUP
Syntax: EMUL <mode>
mode: ML24XX (Anritsu ML2430A Series native mode)
HP436A (Hewlett-Packard)
HP437B (Hewlett-Packard)
HP438A (Hewlett-Packard)
ML4803 (Anritsu ML4803A Series)
Remarks: Set the GPIB emulation to emulate other types of power meters. This com-
mand is available in any emulation mode, and resets the whole GPIB inter-
face when the emulation mode is changed.
When selecting GPIB emulation modes, the instrument configures itself to
the preset conditions of the instrument to be emulated. For example, when
selecting HP 438A emulation, the front panel menus pass through the pre-
sets for the HP 437B (which presets sensor A to dBm) then selects HP
438A emulation (which presets sensor A to Watts).
ML2430A OM 6-35
GPIB OPERATION ML24XXA NATIVE COMMANDS