Anritsu ML2430A - Manual (Page 225)

ML2430A OM A-3
APPENDIX A SYSTEM SPECIFICATIONS
Cursors: Two manually adjustable cursors with power, delta cur-
sor power, between cursor power average, and delta
time readout display.
Delta t
Resolution:
0.5% of display period or 100 ns
TRIGGERING
Trigger
Sources:
Internal , External TTL, GPIB, Manual, Continuous
Delay Range: 0.01 to 1000.00 milliseconds
Delay
Resolution:
0.5% of display period or 100 ns
Internal Trigger
Range:
–15 to + 20.0 dBm MA2470A Series Sensors.
Selectable to –45 dBm
Internal Trigger
Level Accu-
racy:
1.0 dB, typical
External Trig-
ger Range:
TTL rising or falling edge trigger. BNC input.
Manual
Trigger:
Front Panel soft key
SYSTEM CONFIGURATION
Display: LCD Graphic display with dual channel readout mode
and dual peak meters. Backlight and adjustable con-
trast standard.
Save/Recall:
Setup
Memory:
10 storage registers plus RESET default settings
Secure Mode: Erases memory information upon power ON. Default
condition is Secure Mode OFF.
Rear Panel Inputs/Outputs