Anritsu ML2430A - Manual (Page 29)

Chapter 4
Front Panel Operation
4-1
INTRODUCTION The ML2430A Series Power Meter is controlled from the front panel using the
five main menu keys; Sensor, Channel, Trigger, System, and Cal/Zero. This
chapter explains the power-on procedure and the features and functions of each
of the menus. Also refer to Appendix C for quick reference Menu Maps.
4-2
FRONT PANEL CONTROLS The front panel controls are shown and described in Figure 4-1. The following
sections provide more detailed explanations of the Menus and soft keys.
NOTE
Where appropriate, related GPIB commands are listed in brackets
under the menu selection. Refer to Chapter 6, GPIB Operation, for in-
formation on using GPIB commands.
NOTE
This manual is written for instruments fitted with software 3.00 or
above.
ML2430A OM 4-1