Ml4803a emulation commands gpib operation – Anritsu ML2430A User Manual
Page 175
MCR
Clears the reference value at the specified memory loca-
tion.
Syntax:
MCR<mem>
mem:
Memory location 1 to 30.
Remarks:
Clears the reference value at memory store <mem> to 0.0 dBm.
MCT
Clears all the entries at the specified memory location.
Syntax:
MCT<mem>
mem:
Memory location 1 to 30.
Remarks:
Clears frequency, cal factor, offset and reference values at memory store
<mem>.
MDI
Disable memory store setting and use.
MEN
Enable setting of the memory stores. Also will apply the last
memory store configured.
MFG
Set the frequency value at the specified memory location in
GHz.
Syntax:
MFG<mem><;><value>
mem:
Memory location 1 to 30.
value:
Frequency value in GHz.
Remarks:
Set the frequency value at memory store address <mem> to <value> GHz.
MFM
Set the frequency value at the specified memory location in
MHz.
Syntax:
MFM<mem><;><value>
mem:
Memory location 1 to 30
value:
Frequency value in MHz
Remarks:
Set the frequency value at memory store address <mem> to <value> MHz.
MOF
6-88
ML2430A OM
ML4803A EMULATION COMMANDS
GPIB OPERATION