Anritsu ML2430A - Manual (Page 136)

GTTYP Set profile trigger type TRIGGER
Syntax: GTTYP <type>
type: RISE
FALL
Remarks: When the profile system trigger source is set to INTA or INTB (Internal A or
B) the ML2430A Series triggers on a power level (GTLVL) rising or falling.
This command sets the trigger for a rising or falling edge.
Related
Commands: GTLVL, GTSRC
Query: GTTYP?
Returned
String: GTTYP <type>
GTXTTL Set profile external trigger edge TRIGGER
Syntax: GTXTTL <type>
type: RISE
FALL
Remarks: When the profile system trigger source is set to External TTL, the
ML2430A Series triggers on a TTL level rising or falling. This command
sets the trigger for either a rising or falling edge.
Related
Commands: GTSRC
Query: GTXTTL?
Returned
String: GTXTTL <type>
HLIM Set High limits CHANNEL
Syntax: HLIM <c>, <val>
c: 1 or 2
ML2430A OM 6-49
GPIB OPERATION ML24XXA NATIVE COMMANDS