Anritsu ML2430A - Manual (Page 263)

PwrVsTime } if system setup mode = Power vs. Time
[GRMD] CHANNEL
1 | 2
[GRPIX] DATA HOLD representation
Normal | average | min&max | min | max
[GRDDT] Data display TIME
1 min to 24 hours
Source Sweep } if system setup mode = Source Sweep
[GRMD] CHANNEL
1 | 2
[GRPIX] DATA HOLD representation
Normal | min&max | min | max
[SRCMOD] Source sweep MODE
Frequency | power
[SRCSTFRQ,] Sweep START frequency or power
[SRCSTPWR]
10 kHz to 122 GHz
-120.00 dB to +30.00 dB
[SRCSPFRQ,] Sweep STOP frequency or power
[SRCSPPWR]
10 kHz to 122 GHz
-120.00 dB to +30.00 dB
Control } if system setup mode = Profile, Power vs.
} Time or Source Sweep
SWAP
[CUR] CURSOR LEFT
[CUR] CURSOR RIGHT
[GRAUTO] SCALE
[GRYT] TOP
-150.00 dB to +250.00 dB
[GRYB] BOTTOM
-150.00 dB to +250.00 dB
[GRAUTO] AUTOSCALE
C-10 ML2430A OM
SYSTEM MENU APPENDIX C
} Units are dBmV or dB
mV if
} display channel units are dBmV
} or dB
mV respectively.