Anritsu ML2430A - Manual (Page 127)

GPRST Reset min/max graph PROFILE SETUP
Syntax: GPRST
Remarks: When profile DATA HOLD mode is set to Min/Max points, this command is
used to reset the min/max values for each data point.
Related
Commands: GRPIX
GRAUTO Auto scaling SYSTEM
Syntax: GRAUTO
Remarks: Auto scale for all graphic modes (Profile, Source Sweep and Power vs.
Time). This command auto scales the y axis only based on the currently
displayed data.
GRAVG Average between profile cursors PROFILE SETUP
Syntax: GRAVG <state>
state: ON or OFF
Remarks: Turns on or off averaging between cursors. The data returned by the
GRDRQ command includes the average of all data points between the cur-
sors if GRAVG is turned ON.
Related
Commands: GRDRQ
Query: GRAVG?
Returned
String: GRAVG <state>
GRCP Connect points on profile PROFILE SETUP
Syntax: GRCP <state>
state: ON or OFF
Remarks: When set to ON, creates a line graph by connecting the profile data points
together. The default is ON.
Query: GRCP?
6-40 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION