Anritsu ML2430A - Manual (Page 157)

SENSTL Set Sensor Settle Percentage SENSOR
Syntax: SENSTL <s>,<val>
s: A or B
val: 0.01 to 10%
Remarks: Sets how long the system waits for the signal to settle. The value parame-
ter is only used in DEFAULT measurement sensor mode. The settling time
allows some control over the tradeoff between speed, and the extent to
which a measurement has settled to its final value.
Query: SENSTL? <s>
Returned
String: SENSTL <s>,<mode>
SENTYP Return sensor information SENSOR
Syntax: SENTYP <s>
s: A or B
Remarks: This command returns information on the selected sensor in string format:
<sensor type>,<sensor serial>
.
For example: Dual Diode, PBD16.
SRCMOD Source Sweep Mode SYSTEM
Syntax: SRCMOD <mode>
mode: FREQ
POWER
Remarks: Determines whether the voltage sweep applied to the V/Ghz analog input
on the rear panel is interpreted as a frequency or power sweep. The x axis
of the graph on the display will be labeled appropriately.
Query: SRCMOD?
Returned
String: SRCMOD <mode>
SRCSPFRQ Source Sweep Stop Frequency SYSTEM
Syntax: SRCSPFRQ <freq_value>[units]
freq value: 10 kHz to 122 GHz
6-70 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION