Anritsu ML2430A - Manual (Page 133)

val: –150.0 to +250.0
Remarks: It is not necessary to specify units as the displayed units are always as-
sumed. Profile and Source Sweep modes always use dBm, but Power vs.
Time mode can also use dB
mV or dBmV.
Query: GRYT?
Returned
String: GRYT <val>
GT0 Set to ignore the Group Execute Trigger (GET) GPIB com-
mon command GPIB TRIGGER
Syntax: GT0
Remarks: The ML2430A Series will ignore the GET command or a *TRG.
Related
Commands: *TRG, Group Execute Trigger (GET), GT1, GT2
GT1 Set 'GET' command to TR1 type (immediate) trigger GPIB TRIGGER
Syntax: GT1
Remarks: When the ML2430A Series receives a GET or *TRG command, the system
will perform a TR1-type trigger command.
Related
Commands: *TRG, Group Execute Trigger (GET), GT0, GT2
GT2 Set 'GET' command to TR2 type (settling delay) trigger GPIB TRIGGER
Syntax: GT2
Remarks: When the ML2430A Series receives a GET or *TRG command, the system
will perform a TR2-type trigger command.
Related
Commands: *TRG, Group Execute Trigger (GET), GT0, GT1
GTARM Set profile trigger arming TRIGGER
Syntax: GTARM <state>
state: ON or OFF
6-46 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION