Gpib operation ml24xxa native commands – Anritsu ML2430A User Manual
Page 138
Syntax:
HOLD <state>
state:
ON or OFF
Remarks:
This command holds the present graph displayed on the screen and is
available in all graph modes. In Profile and Power vs. Time modes, this
command will not work when trigger source is set to MANUAL. The held
graph can be requested over GPIB by using the OGD or OGBD com-
mands. The same graph data will be held until HOLD is switched off.
Related
Commands:
OGD, OGBD
Query:
HOLD?
Returned
String:
HOLD <state>
IBBLP
Blanking active TTL level
BNC
Syntax:
IBBLP <polarity>
polarity:
POS (positive, for high TTL level)
NEG (negative, for low TTL level)
Remarks:
Changes the expected polarity of the TTL Blanking input signal.
Query:
IBBLP?
Returned
String:
IBBLP <polarity>
KEYCK
Turn key click sound on or off
SYSTEM
Syntax:
KEYCK <state>
state:
ON or OFF
Remarks:
When ON, an audible annunciator produces a click corresponding to every
key press.
Query:
KEYCK?
Returned
String:
KEYCK <state>
LINK
Trigger linking
TRIGGER
Syntax:
LINK <state>
ML2430A OM
6-51
GPIB OPERATION
ML24XXA NATIVE COMMANDS