Anritsu ML2430A - Manual (Page 195)

Example: To set the frequency of the input signal to 300 MHz:
FR300MZ
GT Set group trigger
Syntax: GT<mode>
mode: 0
1
2
Remarks: 0 = Ignore Group Execute Trigger (GET) command
1 = Trigger immediate response to ‘GET’ command
2 = Trigger with delayed response to ‘GET’ command
The GTn command configures what the device does when it receives the
‘GET’ command.
For example: GT1 sets the’ GET’ (Group Execute Trigger) to perform a TR1
type trigger.
Related
Commands: TR
ID Return identification string
Syntax: ID
Remarks: Returned format:
<company name>,<model>,<firmware version>
IDN? HP 437B identity request
Syntax: IDN?
Remarks: Returned format:
<company name>,<model>,<firmware version>
KB Calibration factor
Syntax: KB<val><terminator>
val: 1.0 to 150.0%
6-108 ML2430A OM
HP 437B EMULATION COMMANDS GPIB OPERATION