Anritsu ML2430A - Manual (Page 190)

Remarks: Performs a self test and returns 000.'
Related
Commands: STERR
@1 Set SRE mask
Syntax: @1<val>
val: 8-bit mask
Remarks: Status Byte Structure:
Bit 0: Data ready
Bit 1: Cal/Zero complete
Bit 2: Entry Error
Bit 3: Measurement error
Bit 4: Over/Under limit
Bit 5: Event Status Register
Bit 6: Request Service
Bit 7: N/A
Related
Commands: RV
CL Cal Adjust
Syntax: CL<val><terminator>
val: 50.0 to 120.0
terminator: %
PCT
EN
Remarks: Same as the ML24XXA (native) CFADJ command. Sets a calibration factor
to be used when performing a 0 dBm calibration.
Examples: CL98.5EN
CL98.5%
CL98.5PCT.
CS Clear all status bytes
Syntax: CS
ML2430A OM 6-103
GPIB OPERATION HP 437B EMULATION COMMANDS