Rack mounting installation – Anritsu ML2430A User Manual
Page 16
The required parts and tools are listed below:
Tools Required:
Small Phillips screw driver
Large Phillips screw driver
Small Phillips torque screw driver 10cNm to 120cNm
Assembly drawing “ML2400A/01 RACK MOUNTED LEFT
OR RIGHT OPTION”
Assembly Procedure
1.
Confirm the correct tools are available and the parts listed above are present. Re-
fer to diagram on page 2-5 throughout this procedure.
2.
Fit the two handles 783-1055 to front plate 49362 and the front rack bracket
C37376 using 4 screws 900-795.
3.
Lay the large support bracket D41473 next to the Power Meter as per the assem-
bly drawing. Note if the PM needs to be mounted on the left hand side of the rack,
simply lay the bracket on the PM’s right side. i.e. a mirror image of the assembly
drawing.
4.
2-4
ML2430A OM
RACK MOUNTING
INSTALLATION
Quantity
(each)
Description
Anritsu Part
Number
Max. Torque
Setting
2
HANDLE, PULL, CHASSIS, PLASTIC, HARDWARE
783-1055
4
SPEED NUT
790-319
8
6-32, SST, WASHER, FLAT
900-345
4
M4, 8.00 MM, PHH, SCREW, FLAT HEAD
900-795
4
DECORATIVE SCREW
900-821
8
M3X8, POS, SST, PATCHLOCK, SCREW, METRIC,
PAN HEAD
905-68
.4lbf.in
[45cN m]
6
M3X5, POS, SST, PATCHLOCK, SCREW, METRIC,
PAN HEAD
905-72
.4lbf.in
[45cN m]
6
SNAP RIVET, PLASTIC
788-575
1
RACK MOUNT, SIDE, BRACKET
C37276
1
REAR SUPPORT, BRACKET, RACK MOUNT
C41449
1
RACK MOUNT, SUPPORT, BRACKET
D41473
1
BRACKET SUPPORT, BASE PANEL
49361
1
FRONT FACE PLATE
49362
1
POWER METER FITTED WITH RACK MOUNT TOP
AND BOTTOM COVERS
ML2430A
Table 2-1 ML2430A-01 Rack Mount Kit Parts List