Anritsu ML2430A - Manual (Page 268)

C-6
CAL/ZERO MENU The Cal/Zero menu establishes the 0.0 dBm reference calibration and zeroing of
the sensors. Refer to Chapter 5 for specific procedures.
NOTE
The single sensor channel ML2437A will not display the
Sensor B selection option shown below. The Sensor B se-
lection will only be displayed on the dual sensor channel
ML2438A when both sensors are connected.
Cal/Zero
Zero/Cal
On ML2438A with both sensors connected:
SENSOR A
SENSOR B
[CAL] Cal 0 dBm
On ML2438A with both sensors connected:
SENSOR A
SENSOR B
[ZERO] Zero
On ML2438A with both sensors connected:
SENSOR A
SENSOR B
[RFCAL] RF OFF
[VZERO] Ext V
ML2430A OM C-15/C-16
APPENDIX C CAL/ZERO MENU