Anritsu ML2430A - Manual (Page 262)

C-5
SYSTEM MENU The System menus control the operating modes, display visibility, sound, rear
panel functions, and battery state of the ML2430A Series Power Meter. Note that
the soft keys will appear differently depending upon the operation mode selected
with the Setup soft key.
System
Setup
[OPMD] MODE
Readout | profile | power vs time | source sweep
[*SAV, SYSLD, SYSRD,] SAVE instrument setup
[SYSLNM]
Enter setup number
1 to 10
LIST/SCROLL
[*SAV, SYSLD, SYSRD,] RECALL instrument setup
[SYSLNM]
Enter setup number } only if stores available for RECALL
1 to 10
LIST/SCROLL } only if stores available for RECALL
[LINK] LINK readout/profile trigger
On | off
FAST system recall mode
PRESET to default setup
[*RST] RESET
[FRST] FACTORY
CANCEL
Profile } if system setup mode = Profile
[GRMD] CHANNEL
1 | 2
[GRPRD] Data collection PERIOD
100ns to 7 seconds
[DTRGD] Display trigger DELAY
0 to 7 seconds
[GRPIX] DATA HOLD representation
Normal | min&max | min | max
ML2430A OM C-9
APPENDIX C SYSTEM MENU