Gpib operation hp 437b emulation commands – Anritsu ML2430A User Manual
Page 198
state:
0 (OFF)
1 (ON)
Remarks:
For example: OF1 (Turn offsets ON).
OI
Return identification string
Syntax:
OI
Remarks:
Returned format:
<company name>,<model>,<firmware version>
OS
Set offset value
Syntax:
OS<val>EN
val:
–99.99 to +99.99 dB
Remarks:
Specifies the offset applied to the displayed value. Values can be entered
in 0.01 dB increments.
Example:
OS10.13EN
Set an offset of 10.13 to the displayed value.
PR
Preset the unit
Syntax:
PR
Remarks:
Presets the unit to the HP factory defaults. This command does not effect
the calibration factors stored in the sensor data tables.
RA
Auto Range
Syntax:
RA
Remarks:
Sets the ML2430A Series to automatically select the correct range for the
measurement.
RC
Recall setup
Syntax:
RC<val>EN
ML2430A OM
6-111
GPIB OPERATION
HP 437B EMULATION COMMANDS